 |
Basin Wrenches |
Models 1017. Spring-loaded jaws provide for fast one-hand ratcheting. Nut size capacity from 3/8" to 1-1/4" |
|
Chain Wrenches |
Uses a 15" or 20" chain, along with a double-jaw wrench, providing ratchet like action in either direction. Performs well in tight, close quarters. Choose from 2 different sizes |
|
Complete Die Heads |
Model 12-R die heads. For right-handed threading. The die-head comes complete with a set of 4 replaceable high-quality alloy dies. Choose from 9 different sizes: from 1/8" to 2" |
|
End Pipe Wrenches |
Great for working in close quarters. Similar to a standard straight wrench, but the top hook jaw protrudes back from the lower heel jaw at a 20 degree angle. Choose from 5 different sizes |
|
Flaring Tool |
Model 458. Large feed screw handle gives uniform flares with minimum effort. Flare sizes 1/8" to 3/4" |
|
Hex Wrenches |
Models E-110, No. 17 and No. 25. The Model E-110 is great for removing covers for radiator steam traps. |
|
Internal Wrench |
Model 342. Holds closet spuds, bath,basin and sink strainers through 2". Also, used to install or extract 1" to 2" nipples |
|
Iron Pipe Cutters |
Models 2-A and 42-A. Select either the 2-wheel model, or the 4-wheel model. Pipe cutting capacity from 1/8" to 2" |
|
Large Capacity Tubing Cutters |
Models 151, 152 and 154. Quick-acting design snaps the cutter wheel to the pipe. Cuts from 1/8" to 4-1/2" |
|
Midget Tubing Cutters |
Models 103 and 104. Tiny sized cutters for tubing from 1/8" to 15/16". Great for close quarters |
|
Offset Pipe Wrenches |
Features a jaw opening parallel to the handle, and a narrow hook jaw -- Provides easy access to tight spots. Choose from 3 sizes |
|
Oil and Oilers for Pipe Threading |
Model 418 hand-operated oil pump with 14-1/2" diameter x 8-1/2" deep bucket to catch oil run-off. Completely poratable. Great for threading pipe anywhere. Also, order the cutting oil you need |
|
Pipe Reamer |
Model 2-S. Spiral reamer cuts into pipe fast, leaving nice "clean" cuts. Capacity 1/8" through 2" |
|
Pipe Supports |
Model 46. Make your pipe cutting and threading easier by using this adjustable height (23" to 33") portable tri-stand pipe support . Easily handles pipe up to 10" diameter. |
|
Pipe taps |
"Taps" insert new pipe threads into worn fittings. |
|
Plastic Pipe Cutters |
Model 138. Compound leverage and hardened steel blades makes for quick, clean cuts through plastic pipe and tubing |
|
Ratchet Handle for Die Heads |
Model 12-R. Ratchet handle for the 12-R die heads. Securely holds all sizes for manually threading pipe |
|
Replacement Dies |
For the 12-R die heads. Once your original dies become worn, order a replacement set to get that "good as new" threading capability |
|
Ridgid Bolt Cutters |
Models N18S to N36S. Designed to "center cut" rod, wire mesh, cables and bolts. Slim head permits cutting close to surface. Choose from 4 sizes, with cutting capacities from 7/16" to 1/2" |
|
Spring-Type Tubing Benders |
Specially made for soft metal tubing such as copper, aluminum, etc. Provides fast free-form bending. Choose from sizes 1/4" to 7/8" OD; lengths from 10" to 12" |
|
Standard Tubing Cutters |
Models 10 and 15. Provides clean cuts of copper, brass, aluminum or thin-wall conduit. Pipe capacity from 1/8" to 1-1/8" |
|
Straight Pipe Wrenches |
The popular pipe wrenches! Choose from lightweight silver aluminum or heavy-duty red iron. Choose from 9 different sizes |
|
Strap Wrenches |
Model No. 2 and 5. Work like chain wrenches, but with a non-marring nylon strap. Protects any polished pipe, faucets, etc. Choose from 17" or 29" straps |
|
Utility Vises |
Models 4500R and 5500R. Professional vise with swivel base holds pipe sizes up to 2-1/2" |
|
